CoatingsPro offers an in-depth look at coatings based on case studies, successful business operation, new products, industry news, and the safe and profitable use of coatings and equipment.
Issue link: http://coatingspromag.epubxp.com/i/622102
60 JANUARY 2016 COATINGSPROMAG.COM Aurand Mf g. & Equipm ent Co. ha s b een the leading manufac turer of hand held scarifiers since 1937. We have a wide range of units avail- able to fit your every need: electric, pneumatic, and gas units, ranging in widths of five to 12 inches. Units are also available with dust containment systems. Our units are versatile: they are used to remove coatings from many different surfaces, ranging from concrete to steel. Anywhere that surface preparation is the problem, Aurand has the answer. If you have any questions please feel free to call us at (800) 860-2872 or visit our Website at www.aurand.net. You can also visit with us at the World of Concrete show in Las Vegas booth #S12123, February 1-5, 2016. Write in Reader Inquiry #1821 Aurand Mfg. & Equipment Co. 1210 Ellis St., Cincinnati, OH 45223 (513) 541-7200, (800) 860-2872 Fax (513) 541-3065 www.aurand.net, sales@aurand.net Aurand Mfg. & Equipment Co. ProFILE 2016 Founded in 1878, BARTON International is a family-owned company that has produced the world's highest-quality garnet abrasives for more than seven generations. BARTON garnet abrasives are world-renowned for performance and cost-effec- tiveness. Our garnet abrasives are harder, heavier, and more durable than many other blasting abrasives. They cut faster to deliver more rapid job completion. BARTON garnet abrasives produce a super clean surface finish with a uniform profile that is virtually free of particle embedment. Clean surface finish and uniform profile mean better coating adhesion and longer coating life. BARTON's garnet is a 100% natural, non-ferrous inert mineral containing <1% free silica and no heavy metals. Garnet produces less dust than many other blast abrasives, resulting in improved visibility, less disruption to adjoining work areas, and safer working conditions. Our GTX line of abrasives, a homogeneous blend of natural minerals, brings economy, safety, and consistent performance to a range of blasting applica- tions. Mined and milled in the Adirondack Mountains of New York, GTX contains <1% free-silica and has no heavy metals. It is an effective, safe, and cost competitive alternative to coal slag or silica sand. BARTON garnet abrasives meet all the current industry standards, including SSPC AB-1 (Type 1, Class A), and US Navy Mil-A-22262B(SH). All of BARTON's blast media grades are QPL listed and CARB approved. Write in Reader Inquiry #1822 BARTON International Six Warren Street, Glens Falls, NY 12801 (800) 741-7756 www.barton.com BARTON International ProFILE 2016 Special Section