CoatingsPro offers an in-depth look at coatings based on case studies, successful business operation, new products, industry news, and the safe and profitable use of coatings and equipment.
Issue link: http://coatingspromag.epubxp.com/i/564332
86 SEPTEMBER 2015 COATINGSPROMAG.COM New & Noteworthy Send information and photos (transparencies, prints, or high-res JPG digital files at 300dpi) to Editor, CoatingsPro Magazine, 4501 Mission Bay Dr., Ste. 2G, San Diego, CA 92109 or by e-mail with attachments to news@coatingspromag.com New Penetrating Concrete Crack Adhesive, Hairline Crack Sealer Termal-Chem is excited to announce a new addition to its concrete repair and restoration line. Hairline Crack Sealer is a two-component, very low viscosity epoxy resin system designed to deeply penetrate and bond cracks in concrete structures. It's designed for flling hairline cracks (as small as 0.002 of an inch, or 0.05 mm) in concrete structural concrete slabs, parking decks, bridge decks, runways, and industrial and commercial foors. Tis unique, non-shrinking system penetrates into the smallest fssures, structurally bonding the concrete into a monolithic unit. It stops moisture and chemical penetration through the crack, providing a waterproof seal protecting the concrete and reinforc- ing steel from further corrosion. Tis gravity-fed material is easily applied on dry or moist surfaces by conven- tional tools, such as squeegees or rollers. For more information, contact: Termal-Chem, (800) 635-3773, www.thermalchem.com Reader Inquiry # 3553 Air Bag 8 and Air Bag 12 Now With 25' Or 15' Ducting Options Te A llegro Air Bag Blower all-in-one unit ofers convenience and fexibility for on-site demands. Featuring an 8" (20.3 cm) or a 12" (30.5 cm) metal blower system complete with 15' (4.6 m) and 25' (7.6 m) duct built into a heav y- duty polyester carry bag, the system is designed with zippered ends that allow blower use without removing the blower from the carry bag. Additional zipper openings allow for plug/cord inlet and outlet. Easy-to-carry handles and a shoulder strap attachment make this unit extremely portable. Te blowers feature a nine-blade fan, rugged steel construction with powder- coated housing and grill, and a carry handle with a molded-in two-speed switch. A zipper at the top allows for easy access to the two-speed switch. Quick setup means workers can venti- late airfow without hassle. Te A llegro Air Bag 8 will deliver up to 760 Free Air. Tis AC model features a 1 horse- power motor, 120V, and 1.4 amps, and it weighs only 25 pounds (11.3 kg). Te Air Bag 8's size is 27" (68.6 cm) long by 15" (38.1 cm) wide by 12" (30.5 cm) tall. Te A llegro Air Bag 12 blower delivers 1840 Free Air, has a ½ horse- power motor, and weighs 35 pounds (15.9 kg). Te Air Bag 12 size is 28" (68.6 cm) long by 16" (40.6 cm) wide by 14" (35.6 cm) tall. For more informa- tion, contact: A llegro, (800) 622-3530, www.allegrosafety.com Reader Inquiry # 3554 New Air and Water Barriers Reduce Air Leakage, Improve Building Performance Garland's new Aero-Perm line of perme- able air and water barriers are designed to create healthier and more energy-ef- fcient buildings by forming a fexible blanket of protection over the exterior PMC's New PH-2 Pressure Balance Control Poly urethane Machiner y Cor poration (PMC) is excited to announce the intro- duction of the new Pressure Balance Control (PBC), first showcased at Spray Poly urethane Foam A lliance's (SPFA) Convention & Expo earlier this year. T he PBC is the newest generation in PMC 's process control features, which w ill automatically shut dow n the machine when the pump pressures are not balanced. T his avoids an off-ra- tio material situation and ensures that the material w ill be mi xed at the proper pressure and ratio. T he Pressure Balance Control is available as an add-on feature for existing PH(X)- 25 and PH(X)- 40 machines in the field, and it is now standard on new PMC hydraulic drive machines. T he CE-certified unit has a simple rotar y sw itch that allows the function to be set to a spray differential, reset, or turned off. Features include: • Five different pressure settings that allow the machine to shut off when a predetermined pressure differential has been realized (300–700 psi, or 20–48 BAR); • System "On" and "Fault" indicator lights; • Two transducers that provide increased control over pressure differentials; • A small package size, which allows easy retrofit to PMC PH-25/40 models; • Simple installation; • An inexpensive upgrade to your machine. For more information, contact: PMC, (732) 415-4400, www.polymac-usa.com Reader Inquiry # 3552