CoatingsPro Magazine

JAN 2018

CoatingsPro offers an in-depth look at coatings based on case studies, successful business operation, new products, industry news, and the safe and profitable use of coatings and equipment.

Issue link: https://coatingspromag.epubxp.com/i/921203

Contents of this Issue

Navigation

Page 64 of 116

64 JANUARY 2018 COATINGSPROMAG.COM IF YOU HAVE A WATERPROOFING REQUIREMENT, CONTACT POLYCOAT ! Polycoat Products manufactures high performance polyurethane, polyurea, and polyaspartic coatings for construction and waterproofing industries. Our innova- tive approach serves industry standards as well as special project requirements for contractors, architects, and specifiers. • Vehicular Decks • Pedestrian Decks • Fire Rated Pedestrian Decks • Below Grade Membranes • Caulking Compounds • Polyurethane - Polyurea - Polyaspartic WATERPROOFING PROFFESIONALS ARE AVAILABLE TO PROVIDE TECHNICAL SUPPORT STARTING WITH THE DESIGN PHASE TO THE PROJECT COMPLETION ! Polycoat Products 14722 Spring Ave, Santa Fe Springs, CA 90670 (562) 802-8834 www.polycoatusa.com Polycoat Products ProFILE 2018 Polyset, a technology-driven materials company, offers High Performance Coating Systems for contractors and end users. Our Ply-Guard line of High Performance floor and concrete coatings systems have been used in a wide variety of commercial and industrial applications. These markets include airports, automotive service, commercial kitchens, garage floors, hotels, hospitals, manufacturing facilities, sporting venues, and warehouses. Ply-Guard EP is a two-component, low viscosity, 100% solids resin system used in a variety of flooring appli- cations including high build and decorative applications. Ply-Guard EP can be used as a primer, finish coat, aggregate binder, slurry coat, or epoxy mortar. Ply-Guard AS is a fast curing, two-component polyaspartic coating system. Ply-Guard AS exhibits superior color and gloss retention, excellent abrasion resistance, good flexibility, and can be applied directly to properly prepared concrete and is ideal for both interior and exterior applications. Ply-Guard UR is a two-component, 100% solids, rapid curing, spray-applied polyurea coating system. Ply-Guard UR can be spray-applied to full film thickness (80-200 mils DFT) in a single pass and offers excel- lent impact, chemical, and abrasion resistance for a variety of structural steel and concrete applications. Polyset coatings@polyset.com (518) 664-6000 www.polyset.com Polyset ProFILE 2018 Special Section

Articles in this issue

Links on this page

Archives of this issue

view archives of CoatingsPro Magazine - JAN 2018