CoatingsPro Magazine

CPRO_JAN2014

CoatingsPro offers an in-depth look at coatings based on case studies, successful business operation, new products, industry news, and the safe and profitable use of coatings and equipment.

Issue link: http://coatingspromag.epubxp.com/i/235725

Contents of this Issue

Navigation

Page 90 of 116

Revitalizing Dallas On the vertical surfaces, the crew had to come up with a safe way to apply the 400° F (204° C) coatings. Wearing personal protective equipment, they decided on trowels to pull the material up the concrete surfaces. Working over free flowing traffic with a hot coating was definitely a feat. With zero tolerance for anything falling through the cracks, the crew knew and surpassed the skills needed to perform! functions as one 215-mil (5,461 microns) layer. At this point in the process, it was time to test the waterproofng system to fnd out if there were any leaks or areas where the system was compromised in any way. "International Leak Detection (ILD) was the company we worked with to test the waterproofng of the park deck. Tey used a method called electronic feld vector mapping (EFVM), which is a precise, accurate, and quick way to fnd out if there are any pinholes or problem areas," said Wharton. Te EFVM method creates an electric feld by applying water to the surface of the membrane and using the water as a conductive medium. A low voltage charge is delivered between the non-conductive waterproofng membrane and the conductive structural deck. If a membrane is watertight, the potential diference will be isolated. Any breaches in the membrane will cause an electrical connection to occur. "Tis testing method allows applicators to go back and fx any pinholes quickly, sometimes even in the same day," said Wharton. "And on a job of this size, this quick turnaround really helped us keep on schedule." create the green space that is visible to all those who come to Klyde Warren Park," said Wharton. Finishing Layers With the hot fuid-applied waterproofng asphalt coating in place and the EFVM tests completed, the crew installed the fnal layers of the Henry waterproofng system. Tey laid down Henry G100 S/S, which is similar to a roofng cap sheet, and Henry Rootbloc 20 over the entire waterproofed surface. "Te Rootbloc 20 is a sheet of polyethylene composite geo-membrane specially designed as a barrier against root penetration in vegetative roof assemblies," explained Paschal. Once these two layers were in place, the Chamberlin crew installed Henry DB650 drain boards, or polypropylene water retention and drainage composites. Tese boards are designed not only to keep excess water from escaping, but also to facilitate water movement toward the drains of the park deck. Te installation of the drainage boards marked the last step in the waterproofng process. "Geofoam was installed by others to bring all trenches up to the park level. Ten growing media, grass, and various vegetation was laid on the surface to 90 JANUARY 2014 COATINGSPROMAG.COM A City No Longer Divided Te opening of Klyde Warren Park completely redefned the infrastructure of Dallas, and the right waterproofng system and a skilled crew of applicators played an integral role. "Te city is completely diferent now than how it was before the park opened. People can walk from downtown to uptown and enjoy so many diferent things along the way. Residents can easily access cultural events, museums, the aquarium — Klyde Warren Park truly connects the city," said Paschal. Wharton agrees and also points out how understanding the importance of the hot fuid-applied waterproofng system made it all possible. "Most people can't even comprehend the complex system that is underneath the green space of Klyde Warren Park. Without a durable, reliable, and efective waterproofng system, the park couldn't have been built. We're proud to have been a part of it," he said. CP VENDOR TEAM Henry Company Coatings manufacturer 999 North Sepulveda Blvd., Suite 800 El Segundo, CA 90245 (800) 486-1278 us.henry.com Hotsy Industrial Pressure Washers Equipment manufacturer 10205 N. Walton Walker Blvd. Dallas, TX 75220 (214) 630-7310 www.hotsy.com International Leak Detection Testing company 2064 River Rd. South, Suite 1-S Des Plaines, IL 60018 (866) 282-5325 www.leak-detection.com Rubber Master Equipment manufacturer 220 Myrnam St. Coquitlam, BC, Canada V3K 6G4 (888) 469-4480 www.rubbermaster.com

Articles in this issue

Links on this page

Archives of this issue

view archives of CoatingsPro Magazine - CPRO_JAN2014